Premier External TD-W

Wireless detection where cable gets in the way

Premier External TD-W is for outdoor detection points where the detector position matters, but wiring is difficult.

That could be a driveway, gate approach, external door, side path, outbuilding route or perimeter area where running cable would add disruption or cost. Wireless gives the installer more freedom to place the detector where the coverage works.

Outdoor PIR detection with controlled range

The detector provides selectable range settings of 12m, 8m, 5m or 2m.

That matters outside. More range is not always better. The right setting is the lowest range that protects the area properly. It reduces unnecessary exposure to movement beyond the target area.

Built for outdoor conditions

Premier External TD-W is weather resistant and designed for external use.

The detector should be mounted perpendicular to the ground, at 1.0m to 1.4m high, with 1.2m as the nominal height. Avoid direct sunlight, swaying bushes, washing lines, reflective surfaces and areas where the detection zone is not properly terminated.

Wireless still needs proper commissioning

Wireless solves the cable route. It does not remove the need for correct setup.

The device should be learned to the system before mounting. The installer still needs to check wireless communication, range, sensitivity, pulse count, walk test results and final detection performance.

When Premier External TD-W makes sense

Use Premier External TD-W when the site needs outdoor movement detection and cabling the detector position is impractical.

If a cable route is available and fixed power is preferred, Premier External TD is the wired option. If the area needs internal detection rather than external perimeter detection, specify from the Capture range instead.